Listen-technologies LT- 800-072 Bedienungsanleitung PDF herunterladen (Seite 10)

6

Quick Reference

Quick Reference

Speciﬁ cations

Package Contents

Package Contents

Quick Reference

Adjust audio input levels

of Input 1 and Input 2

here. See page 11 for

more information.

Indicates audio input

level of Input 1 and

Input 2.

Shows

mixed audio

level.

Indicates

Process Mode

is active.

LCD: Shows

which channel

is selected.

Monitor Port: Plug

in a headset and

adjust volume.

Channel Select Down:

Press for 8 seconds to

enter program mode.

See page 8 for more

information.

Contour: Equalization

adjustment. Turn

counter-clockwise for

voice and clockwise for

music.

Mix Level: Adjust so

the Mix Level meter

occasionally lights

the red LED.

Test Tone: Activates

a tone to aid system

setup.

Power

ON / OFF

The Listen LA-201

power supply

connects here.

Set RF Power level here

(¼, ½, and Full). See

page 9 for guidelines

on setting power levels.

Input 2: Connect

unbalanced audio to these

phono connectors, input

level -10dBu or +10dBu.

Input 2: Set switch to

match the level of your

Input 2 audio source,

not used to increase or

decrease level by +10dBu.

Input 1: Used for balanced

connection of a microphone

or line level input. This

combination connector

accepts either XLR or ¼”

phono plugs.

Select Line, Mic or Mic+Phantom

Power. Line is balanced 0 dBu

input level, Mic is -55dBu, +12VDC

supplied in PH Power position.

If not using input 1, leave in line

position.

Mix Output: These connectors

contain a mix of Input 1 and

Input 2. They are unbalanced

phono connectors; and the

output level is -10dBu.

Remote Antenna Connection:

See page 22 or the Listen

website for details on antennas

that can be attached here.

Top mount antenna connection:

Remove rubber plug and screw

antenna in place.

Indicates

Super Quiet

mode is active.

Channel Select Up:

Press for 3 seconds

to lock on current

channel.

LT-800 Back Panel: Connections & Settings

LT-800 Front Panel: Controls & Displays

LT-800 Quick Reference

12 VDC 1.3 A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare